Requirements for the Use Environment of Laser Cutting Machines

  In order to ensure the normal operation of the equipment and extend its service life, the laser cutting machine has certain requirements for the use environment. A good use environment can not only improve cutting accuracy and production efficiency, but also reduce equipment failure rate and reduce the cost of repair and replacement of parts. Therefore, when installing and using laser cutting machines, enterprises should fully consider environmental factors and take corresponding optimization measures to ensure that the equipment operates in the best condition, thereby improving production efficiency and extending the service life of the equipment.

1. Temperature and humidity requirements

The working environment temperature of the laser cutting machine should generally be kept between 10℃ and 30℃ to avoid excessively high or low temperatures affecting the stability of the laser. In addition, the air humidity needs to be controlled within the range of 30% to 70% to prevent the optical components from getting damp or condensing, thereby affecting the cutting quality.

2. Environmental cleanliness

The laser cutting machine should be placed in a dust-free and non-corrosive gas environment. Dust and smoke may contaminate optical components, reduce laser power, and affect cutting accuracy. At the same time, corrosive gases can damage electronic components and metal parts inside the machine. Therefore, it is recommended to maintain good ventilation between the equipment and clean the work area regularly.

3. Power supply stability

Laser cutting machines have high requirements for power supply and should be equipped with a stabilized power supply to avoid voltage fluctuations affecting equipment operation or even damaging the laser or control system. It is recommended to use an independent industrial power supply to ensure current stability and regularly check the circuit connection.

4. Exhaust and smoke exhaust system

A certain amount of smoke and gas will be generated during laser cutting. In order to protect the health of operators and prevent dust accumulation inside the equipment from affecting performance, an efficient exhaust system should be equipped to promptly exhaust the smoke and harmful gases generated during the cutting process.

5. Vibration and anti-static measures

Laser cutting machines should be installed on a solid, non-vibrating ground to ensure cutting accuracy. In addition, in a dry environment, static electricity may affect equipment operation, so it is recommended to take appropriate anti-static measures, such as using anti-static floor mats or grounding devices.

In summary, a reasonable use environment can not only improve the processing accuracy of laser cutting machines, but also extend the life of equipment and reduce maintenance costs. Huawei Laser's laser cutting machines are widely praised in the industry for their advanced technology and stable performance. If necessary, please contact huaweilaser2017@163.com for more product information and technical support.