Prolonging Performance: Daily Maintenance Tips for Laser Cutting Machines

If you have just purchased a laser cutting machine, but you are not familiar with the daily maintenance process of the equipment, don't worry. The following are the key points of daily care and maintenance of laser cutting machines. Through standardized operation and scientific maintenance methods, you can ensure that your laser cutting machine always maintains a stable and efficient operating state and prolongs the service life of the equipment.

1. Always keep the equipment clean

During the processing of the laser cutting machine, a large amount of metal dust and cutting residues will be generated, which are easy to adhere to the surface of the equipment, optical components and guide rails. Therefore, the operator should clean the cutting platform and waste collection device every day to avoid dust accumulation affecting the performance of the equipment. At the same time, the optical lens and laser head need to be wiped with professional cleaning tools and solvents to ensure the quality of the beam.

2. Maintain the cooling system

The laser of the laser cutting machine has extremely high requirements for cooling water, and the quality of water directly affects the performance of the laser. Users should regularly check the water level and water quality of the cooling water, and replace the circulating water when necessary. In addition, the filter system of the water cooler also needs to be cleaned once a month to ensure the cooling effect.

3. Check the gas supply system regularly

The purity and pressure of cutting auxiliary gases such as oxygen, nitrogen or compressed air will affect the cutting quality. It is recommended to check whether the connection of the gas pipeline is firm every week to ensure that there is no air leakage, and adjust the gas pressure to the appropriate range according to the process requirements.

4. Maintain the electrical system

The electrical components of the equipment need to be regularly checked for loose cable connectors and intact insulation. At the same time, the circuit boards and electronic components in the control cabinet should be kept clean to avoid short circuits or equipment failures caused by dust accumulation.

5. Lubricate mechanical parts

Guide rails, gears, screws and other components need to be lubricated regularly to reduce friction losses during operation. At the same time, check whether the guide rails are running smoothly and whether there are any abnormal sounds. Once abnormalities are found, they need to be handled in time.

Through the above simple maintenance measures, the laser cutting machine will always maintain the best performance. When encountering uncertain problems, please contact Huawei Laser's professional after-sales personnel at any time to ensure safe and efficient operation. Huawei Laser-dedicated to providing you with professional, efficient and reliable service guarantees!